DIY Sex Doll: The Easy Way to Make a Sex Doll
Introduction
Have you ever considered creating your very own sex doll? Have you ever wanted to make a doll at home?
If so, here’s how to help!
This blog will walk you through the steps to craft a simple sex doll at home and provide what you need to pay attention to.
Why Make a Homemade Sex Doll?
One of the main reasons is that homemade options are quite affordable. Sex dolls are available at a price point that varies significantly, typically falling between $500 and $10,000. This range is influenced by factors such as the materials used, the design intricacies, and the specific model of the doll. The price of a sex doll generally increases with its level of detail and realism. With a homemade approach, you could spend less than $500, or potentially nothing!
The other is uncertainty about whether the doll is worth the investment. Suppose someone purchases a doll costing two or three thousand dollars but only uses it a few times, or discovers that the experience falls short of expectations. Creating your doll before making a purchase is the ideal approach in this scenario. You can determine if it aligns with your preferences in this way.
Tools to Be Prepared
Constituting the Body
- Model head×1
- Pillow×1/thin-light foam pad×1
- Round pillow×1
- Cotton stuffing
- Fabric (elastic is preferred, such as stretch cotton, nylon, and polyester)
- Artificial breast×1 (If the budget is limited, consider opting for balloons.)
- Multiple towels/fabrics
- Silicone hand model×2
- Silicone foot model×2
- Clear tapes
- Full-body suit×1/ favorite female top and pant×1
Constituting Vaginal/Anal Masturbator
- Can (potato chip can)×1/cup×1
- Super soft cellulose sponge×5
- Plastic bag/inspection glove×1
- Rubber band×1
Step-by-Step Guide on Crafting a Simple Sex Doll
Step 1 Making the Upper Body
Making the Torso
Begin by rolling up the thin-light foam pad and securing it with tape to form a basic upper-body structure. Next, fill it with cotton filler to make it soft and flexible, preventing damage when pressed.
If you find using a foam cushion challenging, consider opting for a pillow as above picture. The great benefit is its direct usability, requiring no additional steps.
Wrapping the filler directly in fabric offers a more flexible approach, allowing for adjustments to the torso size, though it may require a bit more effort.
Making Breasts
Put the fake breast shown in the above picture on the upper body, find a perfect angle and position, adjust the shoulder strap length, and buckle. Next, secure it in place with tape or pins to ensure it stays in place.
If your budget doesn’t allow for buying artificial breasts, consider using balloons as an alternative option. Inflate the balloon with water to your desired size. Next, take the fabric or bra to wrap it around, ensuring it aligns perfectly with your torso, then secure it to the pillow with a pin.
Putting on Clothes
Dress in a full-body suit. It’s better to choose a suit with a zipper. The zipper allows you to effortlessly wrap the body and wear it with ease, unlike T-shirts and other items that can be a bit tricky to put on.
If the bodysuit is not to your liking, feel free to swap it for something that piques your interest more. Please keep in mind to avoid options that reveal too much, as the torso inside might be shown.
Creating Arms and Hands
Arms
After dressing up, we’ll dive into crafting the doll’s hands. Take the towel, roll it up tightly, secure it with tape to maintain its shape, and then neatly tuck it into the sleeves of the bodysuit. This step could utilize more towels to make the arms full.
If extra towels are unavailable, feel free to use fabrics or any old clothes you no longer need.
Hands
let’s bring out the model of the artificial hand that we’ve prepared. Gently pull the sleeve up slightly, insert the hand into the sleeve, use the tape, and securely wrap the top of the hand around the towel. Once done, lower the sleeve to cover the place of the wrap. For enhanced fixation, consider wrapping an additional layer or two of tape over the sleeve.
Step 2 Making the Lower Body
Creating a Vaginal/Anal Masturbator
Selecting a can or a cup of the right length is essential. Opt for a cup with a wide opening at the top and a narrower base to ensure the sponge stays securely in place.
Gather the right amount of sponges based on the can’s length. Prepare five sponges using a Pringles can as your guide. Stack the sponges in the can, positioning them front to back to maximize space, while ensuring a channel remains open in the center.
For optimal results, we suggest positioning a sponge flat against the can’s opening and creating a slit along the passage to replicate the contours of the labia. This will enhance your experience beyond simply exercising in the can.
To safeguard the private area, place a plastic bag or examination glove inside, then cover the wrist section with the reverse side over the potato chip can, securing it with a rubber band. In this way, a simple vaginal masturbator is complete. An anal masturbator is capable of achieving in this way.
We recommend using inspection gloves over plastic bags due to their superior flexibility, strength, and durability. Unlike plastic bags, these gloves are less likely to break, offer a soft touch, and are designed to minimize allergy risks.
Put on a new glove with every use. It is noted that with proper cleaning, gloves can be reused effectively. If you have any lingering concerns, consider incorporating condoms for added protection.
Once the masturbators are set up, we should create a pelvis, providing support for both the vagina and anus.
Decide on an appropriate spot beneath the pillow, then use a box cutter to carefully create a slit, ensuring it aligns with the can’s opening length. Next, remove the cotton wool and place the masturbator inside. For optimal stability, apply tape around the can to reduce any unwanted movement.
Building the Legs and Feet
Legs
The legs are created similarly to the arms: rolled in towel, shaped with tape, and neatly tucked into trousers.
This step needs to be recognized that the thickness of the thigh and calf differ, which means the towel roll thickness should be appropriately adjusted. For thighs, consider wrapping several towels together or opt for a longer, thicker bath towel for optimal coverage.
Once the legs are complete, take the time to make any necessary adjustments. Gently pinch the legs with your hands, mold them into your desired shape, and fasten them securely with tape.
Feet
This is identical to the hand. Adjust the trouser to reveal the towel’s edge, ensuring the top of the foot aligns with it, and secure it with tape.
Step 3 Attaching the Head
The moment we’ve all been waiting for has arrived: it’s time for our highly anticipated head installation. An attractive face is a key element that enhances the allure of a doll.
Pick a head model that appeals to you. Similar to the picture provided, complete with facial features and hair. However, this also comes with a drawback; it is hard to touch, the kiss experience may not be enjoyable, and it lacks the ability for oral sex.
Alternatively, you might opt for a silicone head model, that is soft and kissable. Please keep in mind, though, that this option typically requires you to create the facial features, demanding a high level of skill in painting and makeup.
Subsequently, unzip the catsuit, create an opening in the top of the pillow, place the neck of the head model, and evenly distribute the cotton wool inside.
To enhance head support, use a PVC pipe or a similar stick. Secure the pipe to the neck with a nail to ensure the head remains stable and doesn’t easily fall.
Step 4 Dealing with Details
At this stage, you can find if there are any aspects of the doll you create that may require enhancement.
If you enjoy adorning the fingers with nail polish, choose a color that resonates with your doll to enhance the beauty of the hands. To achieve that ideal waist-to-hip ratio, cinch a belt around the torso to highlight a slim waist, and incorporate a pillow for a beautifully rounded backside.
Step 5 Enjoying Your Doll
After the love doll is made, then the experience truly begins.
In the room, draw the curtains, prepare the lubricant, set the perfect ambiance with music, unzip, reveal the breast, caress, kiss, and gently squeeze.
Unzip the pants, reveal the intimate area, take out a marker to stretch the hole wide enough to fit you, apply the perfect amount of lubricant, and start tasting it.
Don’t forget to tidy up promptly after your enjoyment. Failing to do so can lead to unpleasant odors, promote bacterial growth, and pose risks to the health of your intimate areas. Information about how to clean a sex doll can be found here.
Points to Note
Security
Choose safe, non-toxic materials for your sex dolls, ensuring they are free from harmful chemicals like phthalates. Be sure the fabric and filler are safe for skin contact, ensuring no irritation occurs upon contact.
Hygiene
Following each use of the doll, it’s essential to clean or replace promptly the masturbation device. It’s essential to periodically inspect the materials inside the doll for any signs of deterioration, mold, or discoloration, ensuring that the doll remains clean and sanitary.
Regular Maintenance
While a self-made doll may be budget-friendly, it often falls short in detail and structural design. Its overall durability doesn’t quite match that of a professionally crafted doll, and regular maintenance is necessary.
Conclusion
Creating your simple sex doll is a meaningful project that lets you express your creativity. This blog’s guide empowers you to craft your distinctive companion.
It’s important to recognize that while creating a homemade sex doll is possible, the outcome will not match the quality of professionally crafted options. Additionally, factors such as safety, hygiene, and durability need to be taken into account.